To find who scored a home run today, check the official MLB Gameday box score or the league's daily home run leaderboard, which update within minutes of the play. A home run is credited when a batter circles all bases and scores on a fair hit without a fielding error or fielder's choice. Live "home run today" trackers occasionally show a name before an official scorer finalizes the play, so verify on the box score rather than a push alert.

What a home run actually is in the rulebook

The home run is one of the few baseball events where a single swing can produce a run, a hit, and a statistic at once. Under the standard scoring rules, a batter gets a home run when they touch first, second, third, and home in order on a fair hit. The hit must clear the fence in flight, or the batter must reach home without being put out. The play counts as an at-bat, a hit, a run scored, and at least one run batted in.

The details matter for anyone trying to confirm a home run from a box score. A ball that bounces over the fence is a ground-rule double, not a home run, because the batter stops at second. A fly ball that clears the wall but is dropped by a fan is still a home run if the umpire judges the fan interfered and the ball would have cleared anyway. An inside-the-park home run is scored the same way as an over-the-fence one. The batter simply kept running while the defense failed to record an out at home.

The four-base award depends on the batter completing the trip. If a runner misses a base on a home run and the defense appeals before the next pitch, the batter is out and no run scores. This is why official scorers watch the whole circuit, not just the trajectory of the ball.

How a batted ball becomes a home run

A home run is a collision outcome first and a statistic second. The physics is easy to describe and hard to execute. A pitched ball arrives with horizontal velocity, and the bat reverses part of that momentum. The resulting exit velocity and launch angle determine whether the ball carries far enough to clear the wall or finds a gap for an inside-the-park trip.

Exit velocity, measured off the bat, is the strongest predictor of a home run. Balls hit at roughly 95 mph or harder with a launch angle around 25 to 35 degrees carry the farthest. Balls hit too high become routine fly outs, and balls hit too low become line drives that may find the gap but rarely clear the fence. A classic fly-ball home run combines a high exit velocity with a launch angle in that sweet spot.

Park dimensions change the threshold. A ball that travels 400 feet is a home run in most parks but a warning-track out in a deep center field. Elevation matters too. Coors Field in Denver sits about a mile above sea level, where thinner air reduces drag and adds several feet of carry. Wind can add or remove distance depending on direction and speed. Humidity, temperature, and even the seam height of the baseball affect how far a batted ball travels.

The ball itself is a controlled variable with real consequences. The baseball has a rubber core wrapped in yarn and covered in leather, with raised seams. Changes to the core and seam height shift how far balls fly. A livelier ball raises home run rates across the league, and a deader one suppresses them. That is why league-wide home run totals move in waves even when player talent is stable.

Quantifying the run and the odds

A home run is worth more than the one run on the scoreboard. Run expectancy tables show how many runs a team expects to score from a given base-and-out state. With nobody on and two outs, a team expects roughly a quarter of a run. A home run converts that state into at least one run and ends the at-bat. With runners on base, the swing can turn a modest expectancy into two, three, or four runs at once. That leverage is why home runs swing win probability more than almost any other single event.

The odds of a home run vary by count and situation. Hitters swing harder in favorable counts and protect the plate with two strikes. League-wide, home runs occur on roughly one in 30 to one in 40 plate appearances in a typical season, though rates fluctuate with the ball and the era. Power hitters exceed that average by a wide margin. A 40-home-run season over 600 plate appearances works out to about one home run per 15 trips.

Stadium effects are large enough to show up in a season. Coors Field regularly ranks near the top of park home run factors, while pitcher-friendly parks suppress them. A player's home park can shift their season total by several home runs compared with a neutral park. This is why analysts separate a hitter's raw home run total from a park-adjusted one.

Home runs also cluster. A hitter who goes deep once often sees better pitches afterward because pitchers adjust, and the next home run may come on a different pitch mix. The randomness of a single day means "who scored home run today" is often answered by an unfamiliar name. A bench player with five career home runs can hit one on any given afternoon.

Edge cases that trip up live trackers

The most common confusion is the difference between a home run and a run scored by other means. A batter can score on a single, a double, a walk, a hit-by-pitch, or an error without hitting a home run. If a tracker filters on "runs scored today," it will list players who never left the batter's box on a home-run swing. The keyword asks about home runs, not runs.

The second trap is the timing of the official record. Live feeds flag a long fly ball as a "probable home run" when it leaves the bat, then confirm or overturn it after the ball lands. A ball that hits the top of the wall and bounces back is an in-play double or triple, not a home run. A fan reaching over the wall can turn a would-be home run into interference, and the umpire's ruling decides the outcome. The box score is the final word.

A third edge case is the inside-the-park home run, which looks nothing like a normal one. The batter hits the ball into play, the defense fails to record an out at home, and the batter scores. Live trackers sometimes log it minutes after the play because it unfolds across several seconds. It counts the same in the stat line.

The fourth is the walk-off home run, which ends the game. The batter may stop running after touching first if the winning run scores, but the official scorer still credits a home run. This is why box scores sometimes show a walk-off home run for a player who never reached home plate.

Professional caveats and common misconceptions

A common misconception is that "home run today" lists reflect final statistics. They often reflect the live feed, and the feed is provisional. A hit initially logged as a home run can be changed to a double if replay or the official scorer rules the ball hit below the fence line or was touched by a fielder. Baseball's replay system can also overturn a home run call when a fan interferes or a fielder's glove is judged over the wall.

Another misconception is that home runs are purely about strength. Contact quality and timing matter more than raw power. A strong hitter with a poor launch angle can pound the ball into the ground, while a moderate hitter with an ideal swing plane can hit 30 home runs. The difference between a warning-track fly out and a home run is often a few feet of carry, which comes from launch angle, exit velocity, and park geometry working together.

A professional caveat: home run rates are not a stable measure of a player's talent over a single week. Analysts use expected metrics, which estimate a home run probability from exit velocity and launch angle, to separate luck from skill. A hitter with a high expected home run total but a low actual total is usually unlucky, not bad. The reverse is usually unsustainable.

The ball is another professional caveat. League-wide home run totals have swung by hundreds of home runs between seasons in the past, and the ball's construction is a known contributor. Anyone comparing seasons across years should account for the ball and the park before drawing conclusions about player skill.

How to confirm today's home runs, step by step

To answer "who scored home run today" reliably, start with the official league box score for each completed game. The box score lists every home run with the inning and the runners on base. This is the authoritative source.

Open the league's daily scoreboard and click each final game. Read the box score's "HR" line under the batting section. Cross-check the play-by-play feed for the inning and the batter. Confirm the game is final or the play is complete, not pending review. Ignore push alerts and social posts until the box score updates.

If a game is still in progress, the live feed shows a "probable" home run before confirmation. Wait for the play to complete and the scorer to log it. If a player appears in two games in one day, a doubleheader, check both box scores separately.

For a league-wide daily list, use the official home run leaderboard rather than a fantasy app. The leaderboard updates after games end and lists the player, team, and inning. Fantasy and betting apps sometimes lag or show projected data. A push notification can name a player seconds after contact, but it is not a confirmation.

Reading a home run line correctly

Box scores and stat lines compress a lot into a few characters, and misreading them causes most "who scored" errors. The home run is usually listed as "HR" with the inning and the number of runners on base. A "solo" home run has no runners on. A "two-run" home run has one runner on. A "three-run" home run has two runners on. A "grand slam" has the bases loaded. The total runs scored on the play equal the runners plus the batter.

The RBI column credits the batter with one RBI per run scored on the home run, including their own run. A solo shot adds one RBI. A grand slam adds four. This is why a box score can show a player with one hit and four RBIs. The hit is the home run, and the four runs batted in come from a single swing.

The run column credits the batter with one run scored. If a player hits two home runs in a game, the box score shows two hits, two runs, and two or more RBIs depending on runners. The exact numbers depend on the base states.

A comparison of event types helps clarify why the box score looks the way it does.

Event Batter credited Runs scored on play Typical box score line
Solo home run Hit, run, RBI 1 1 hit, 1 run, 1 RBI
Two-run home run Hit, run, 2 RBI 2 1 hit, 1 run, 2 RBI
Three-run home run Hit, run, 3 RBI 3 1 hit, 1 run, 3 RBI
Grand slam Hit, run, 4 RBI 4 1 hit, 1 run, 4 RBI
Inside-the-park home run Hit, run, RBI At least 1 1 hit, 1 run, 1 or more RBI
Ground-rule double Hit, no run unless driven in 0 or more 1 hit, 2 bases
Triple Hit, no run unless driven in 0 or more 1 hit, 3 bases

The table makes the key distinction clear. A home run always credits the batter with a run scored, while a ground-rule double usually does not unless a runner scores behind it.

A timeline of how a home run becomes official helps explain why live lists lag.

Stage What happens Typical timing
Contact Ball leaves the bat; live feed flags probable home run Instant
Ball flight Ball clears the wall or lands; umpire signals 1-5 seconds
Base running Batter rounds the bases; runners score 10-25 seconds
Play completion Batter touches home or play ends Up to 30 seconds
Official scoring Scorer logs the home run in the box score 1-5 minutes
Leaderboard update League daily list refreshes Within minutes after game
Final review Replay confirms or overturns if challenged Minutes, sometimes longer

The gap between contact and the box score is why a live tracker can name a player before the play is final. The gap also explains why a "home run today" alert can be wrong when the ball hits the wall or a fan interferes.

What daily home run data cannot tell you

A single day's home run list says nothing about a player's skill or a team's trajectory. It is a snapshot of random events in a game defined by randomness. A player who hits a home run today may go weeks without another. A player who never appears on the list may still be an elite power hitter.

Daily data also cannot confirm the ball's role in a home run. The ball's construction, the park, the weather, and the pitcher's location all shape the outcome. A home run today is a result of a specific pitch, a specific swing, and a specific environment. Comparing one day's list to another tells you almost nothing without context.

The stat line also cannot tell you whether a home run was "clutch." A home run in a blowout counts the same as one in a tie game. Analysts use win probability added to measure leverage, but the box score does not show it. The daily leaderboard ranks players by home runs, not by their impact on the game's outcome.

The practical limit is this: use the box score to confirm who hit a home run today, and use season-level, park-adjusted, and expected metrics to evaluate what that home run means. The daily list answers a factual question. It does not answer a skill question.

If you need a real-time answer, the official league box score and play-by-play are the only reliable sources. Push alerts, fantasy apps, and social media are faster but less accurate. The difference between a probable home run and an official one is the difference between a headline and a statistic.